Instructions

WE CAN REBUILD YOUR SPINDLE..................

Brake in instructions for newly rebuild spindle:

Before you begin normal operation your spindle must run freely for at least 4 hours. You must start at 250 RPM and increase this amount every ½ hour.

Whenever increasing RPM by 250 you must also switch the rotation of the spindle in opposite direction.

The temperature of the spindle must be monitored at all this time.

On the first run the spindle may become very warm; it can not exceed 150 C.

If the temperature exceeds a 150 C during the brake in time, the machine must be stopped, the spindle cooled off completely and then the whole procedure repeated from the beginning.

Rebuild and Save

Spindle that has been rebuilt can satisfy the requirements of your production at a fraction of the cost of a new one. A mechanical rebuild along with a calibration can provide the performance you need at significant cost saving.

Our Experience

.We have engineers with 20 years of experience working on CNC machines.

We specialize in spindle bearings rebuild or cartridge replacement.

We are factory trained !

LET US REPLACE YOUR SPINDLE BEARINGS